Possible causes

Air fuel ratio (A/F) sensor 1

Air fuel ratio (A/F) sensor 1 heater

Fuel pressure

Fuel injector

When is the code detected?

The output voltage computed by ECM from the A/F sensor 1 (Bank 1) signal is shifted to the rich side for a specified period

Symptoms

– Engine Light ON (or Service Engine Soon Warning Light)

P1274 Description

The A/F sensor is a planar dual-cell limit current sensor. The sensor element of the A/F sensor is the combination of a Nernst concentration cell (sensor cell) with an oxygen-pump cell, which transports ions. It has a heater in the element.

The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide λ range (0.7 < λ < air).

The exhaust gas components diffuse through the diffusion gap at the electrode of the oxygen pump and Nernst concentration cell, where they are brought to thermodynamic balance.

An electronic circuit controls the pump current through the oxygen-pump cell so that the composition of the exhaust gas in the diffusion gap remains constant at λ = 1. Therefore, the A/F sensor is able to indicate air/fuel ratio by this pumping of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of 700 – 800C (1,292 – 1,472F).

P1274 Information for specific makes

P1274 BUICK
P1274 CADILLAC
P1274 CHEVROLET
P1274 FORD
P1274 GMC
P1274 INFINITI
P1274 NISSAN