P0304 AUDI Cylinder 4 Misfire Detected

Possible causes
– Faulty spark plug 4
– Clogged or faulty fuel injector 4
– Faulty ignition coil 4
– Fuel injector 4 harness is open or shorted
– Fuel injector 4 circuit poor electrical connection
– Ignition coil 4 harness is open or shorted
– Ignition coil 4 circuit poor electrical connection
– Insufficient cylinder 4 compression
– Incorrect fuel pressure
– Intake air leak
Tech notes
The P0304 code means that the cylinder 4 is misfiring or is randomly misfiring. Start by checking for intake leaks an if no leaks are found the next step is to replace the spark plugs on cylinder 4. If the problem persist more tests needs to be done to diagnose problem, see “Possible Causes”
When is the code detected?
Engine Cylinder 4 is Misfiring.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Lack/loss of power
– Hard start
– Engine hesitation
P0304 AUDI Description
When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, the Engine Control Module (ECM) can determine that a misfire is occurring.
AUDI Technical Service Bulletins for P0304 code
2008 AUDI A6 ENGINE AND ENGINE COOLING:ENGINE
2008 AUDI A6 ELECTRICAL SYSTEM: SOFTWARE
2003 AUDI A4 ENGINE AND ENGINE COOLING
2003 AUDI A4 CABRIOLET ENGINE AND ENGINE COOLING
2004 AUDI A4 ENGINE AND ENGINE COOLING
2004 AUDI A4 CABRIOLET ENGINE AND ENGINE COOLING
2005 AUDI A4 ENGINE AND ENGINE COOLING
2001 AUDI AUDI ENGINE AND ENGINE COOLING:ENGINE
2002 AUDI AUDI ENGINE AND ENGINE COOLING:ENGINE
2003 AUDI AUDI ENGINE AND ENGINE COOLING:ENGINE