Possible causes

– Faulty Vehicle Speed Sensor
– Vehicle speed sensor harness or connectors is open or shorted
– Vehicle speed sensor circuit poor electrical connection
– Faulty Engine Control Module (ECM)

When is the code detected?

The signal sent by the vehicle speed sensor to ECM is too low.

Symptoms

– Engine Light ON (or Service Engine Soon Warning Light)
– Speedometer may not work properly
– Transmission shifting problem

P0502 Description

The vehicle speed sensor outputs a 4 pulse signal for every revolution of the rotor shaft, which is rotated by the transmission output shaft via the driven gear. After this signal is converted into a more precise rectangular waveform by the waveform shaping circuit inside the combination meter, it is then transmitted to the Engine Control Module (ECM). The ECM determines the vehicle speed based on the frequency of these pulse signals.

http://cardiytool.com/images/3116.gif

P0502 Information for specific makes

P0502 FORD
P0502 BUICK
P0502 CADILLAC
P0502 CHEVROLET
P0502 GMC
P0502 PONTIAC
P0502 SATURN