Possible causes

– Low transmission fluid level
– Dirty transmission fluid
– Faulty 2-3 Shift Solenoid Valve
– 2-3 Shift Solenoid Valve harness or connectors
– 2-3 Shift Solenoid Valve circuit is open or shorted

Tech notes

When the a transmission solenoid is stuck on, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is very dirty, it is recommend changing the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a transmission mechanical failure and that the transmission will need to be rebuilt or replaced.

When is the code detected?

The P0757 code is detected when the ECM has detected a mechanical fault with the solenoid energized, valve stuck on

Symptoms

– Engine Light ON (or Service Engine Soon Warning Light)
– Transmission will not shift gears

P0757 ISUZU Description

2-3 shift solenoid valve is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.

ISUZU Technical Service Bulletins for P0757 code